# Install O2Physics on Alma 9 on WSL issues

**URL:** <https://alice-talk.web.cern.ch/t/install-o2physics-on-alma-9-on-wsl-issues/1624>\
**Category:** O²\
**Created:** [October 12, 2024, 7:01am UTC](https://alice-talk.web.cern.ch/t/install-o2physics-on-alma-9-on-wsl-issues/1624 "2024-10-12T07:01:12Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bbinjami](https://alice-talk.web.cern.ch/letter_avatar_proxy/v4/letter/b/e8c25b/32.png) [@bbinjami](https://alice-talk.web.cern.ch/u/bbinjami)\
**Post date:** [October 12, 2024, 7:01am UTC](https://alice-talk.web.cern.ch/t/install-o2physics-on-alma-9-on-wsl-issues/1624/1 "2024-10-12T07:01:13Z")

</div>

Good Day

I get this output error when trying to install O2 physics:

```auto
==> Unpacking FairRoot@v18.4.9-alice3: done
==> Compiling O2@daily-20241011-0200 (use --debug for full output): done
==> Compiling O2Physics@master (use --debug for full output): failed
2024-10-12@05:44:26:ERROR:O2Physics:O2Physics:0: Error while executing /root/alice/sw/SPECS/slc9_x86-64/O2Physics/master-local1/build.sh on `BBarsch-NB1'.
2024-10-12@05:44:26:ERROR:O2Physics:O2Physics:0: Log can be found in /root/alice/sw/BUILD/O2Physics-latest/log
2024-10-12@05:44:26:ERROR:O2Physics:O2Physics:0: Please upload it to CERNBox/Dropbox if you intend to request support.
2024-10-12@05:44:26:ERROR:O2Physics:O2Physics:0: Build directory is /root/alice/sw/BUILD/O2Physics-latest/O2Physics.
2024-10-12@05:44:26:ERROR:O2Physics:O2Physics:0:
2024-10-12@05:44:26:ERROR:O2Physics:O2Physics:0: Note that you have packages in development mode.
2024-10-12@05:44:26:ERROR:O2Physics:O2Physics:0: Devel sources are not updated automatically, you must do it by hand.
2024-10-12@05:44:26:ERROR:O2Physics:O2Physics:0:
2024-10-12@05:44:26:ERROR:O2Physics:O2Physics:0: This problem might be due to one or more outdated devel sources.
2024-10-12@05:44:26:ERROR:O2Physics:O2Physics:0: To update all development packages required for this build it is usually sufficient to do:
2024-10-12@05:44:26:ERROR:O2Physics:O2Physics:0:
2024-10-12@05:44:26:ERROR:O2Physics:O2Physics:0: ( cd O2Physics && git pull --rebase )
[root@BBarsch-NB1 alice]# ==> Downloading tarball for GEANT4@v11.2.0 [32%] .2024-10-11@21:39:36:ERROR:O2Physics:GEANT4:0: GET https://s3.cern.ch/swift/v1/alibuild-repo/TARS/slc9_x86-64/store/e4/e44bf2c6957f9543727fcd77abd8a1b83e7a03b7/GEANT4-v11.2.0-9.slc9_x86-64.tar.gz failed: only 632414076 out of 1945537668 bytes downloaded
bash: ==: command not found
[root@BBarsch-NB1 alice]# : done
[root@BBarsch-NB1 alice]# ==> Compiling GEANT4@v11.2.0 (use --debug for full output): failed
bash: syntax error near unexpected token `('
[root@BBarsch-NB1 alice]# 2024-10-11@22:17:29:ERROR:O2Physics:GEANT4:0: Error while executing /root/alice/sw/SPECS/slc9_x86-64/GEANT4/v11.2.0-9/build.sh on `BBarsch-NB1'.
> 2024-10-11@22:17:29:ERROR:O2Physics:GEANT4:0: Log can be found in /root/alice/sw/BUILD/GEANT4-latest/log
> 2024-10-11@22:17:29:ERROR:O2Physics:GEANT4:0: Please upload it to CERNBox/Dropbox if you intend to request support.
> 2024-10-11@22:17:29:ERROR:O2Physics:GEANT4:0: Build directory is /root/alice/sw/BUILD/GEANT4-latest/GEANT4.

```

Then the logs are attached

Regards  
Binjamin  
[logs.txt](https://alice-talk.web.cern.ch/uploads/short-url/rcMfHWeICxhDN3ElBY9wtgY07gZ.txt) (23.4 KB)

---

<div class="post-metadata">

**Author:** ![amanojna](https://alice-talk.web.cern.ch/letter_avatar_proxy/v4/letter/a/3e96dc/32.png) [@amanojna](https://alice-talk.web.cern.ch/u/amanojna)\
**Post date:** [December 17, 2024, 8:39am UTC](https://alice-talk.web.cern.ch/t/install-o2physics-on-alma-9-on-wsl-issues/1624/2 "2024-12-17T08:39:08Z")

</div>

I think this is a memory issue. Create a 64 or 128G swap space… worked for me 😀
