# TPC event simulation with high Pileup

**URL:** <https://alice-talk.web.cern.ch/t/tpc-event-simulation-with-high-pileup/809>\
**Category:** O² CRU\
**Created:** [January 19, 2021, 9:44am UTC](https://alice-talk.web.cern.ch/t/tpc-event-simulation-with-high-pileup/809 "2021-01-19T09:44:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![samarth](https://alice-talk.web.cern.ch/letter_avatar_proxy/v4/letter/s/ed655f/32.png) [@samarth](https://alice-talk.web.cern.ch/u/samarth)\
**Post date:** [January 19, 2021, 9:44am UTC](https://alice-talk.web.cern.ch/t/tpc-event-simulation-with-high-pileup/809/1 "2021-01-19T09:44:43Z")

</div>

Hi experts,

I’m new to O2 sim. I would like to understand how to run the simulations with high pileup at 50Khz.  
Any help would be appreciated.

regards,  
sam

---

<div class="post-metadata">

**Author:** ![shahoian](https://alice-talk.web.cern.ch/letter_avatar_proxy/v4/letter/s/51bf81/32.png) [@shahoian](https://alice-talk.web.cern.ch/u/shahoian)\
**Post date:** [January 19, 2021, 9:53am UTC](https://alice-talk.web.cern.ch/t/tpc-event-simulation-with-high-pileup/809/2 "2021-01-19T09:53:27Z")

</div>

Hello Samarth,

See [https://github.com/AliceO2Group/AliceO2/blob/dev/doc/DetectorSimulation.md](https://github.com/AliceO2Group/AliceO2/blob/dev/doc/DetectorSimulation.md)  
Note that the 50kHz is the default interaction rate, if you need to change it, use `--interactionRate [Hz]` option of o2-sim-digitizer-workflow.
